Combined bearings for “I” standard rails


Handling - Combined bearings for “I” standard rails

Technical Drawing and Exploded View - Combined bearings for “I” standard rails


1. ZRS seal ring
2. Support thrust ring
3. Axial part
4. Pivot
5. Outer ring
6. Cylindrical rollers
7. Inner ring
8. ZRS seal ring

Technical Data - Combined bearings for “I” standard rails

CR rif/ref d (mm) T (mm) D (mm) H (mm) h (mm) B (mm) A (mm) S (mm) r (mm) C (KN) Co (KN) Ca (KN) Coa (KN) Ø a rich / on req Profilo / Perfil Rif. - Ref.
400-0055/1 35 48 70,1 40 30,5 23 2,5 22 4 55,5 91,7 17,6 25 70,4 / 70,7 3018 1
400-0057 40 53 77,7 40,7 29 23 3 26 4 58,4 100 28,2 35,8 78,1 / 78,5 3019 1
400-0075 40 53 77,7 45 34 23 7 21 4 58,4 100 28,2 35,8 78,1 / 78,5 3019 2
400-0457/E 40 54 77,7 40 29 23 3,5 26 4 58,4 100 28,2 35,8 * 3019 3
400-0058/52 45 59 88,4 52 39 30 3,5 26 3 83,8 132,3 27,7 42 88,9 3020 1
400-0059 50 67 101,2 46 33 28 3 30 3 91 150 31 49 101,9 2912 1
400-0077 50 67 101,2 50,5 37,5 28 7 21 3 91 150 13,2 14,5 101,9 2912 2
400-0459/E 50 69 101,2 46 33 26 4,5 30 3 91 150 31 49 * 2912 3
400-0060 55 71 107,7 53 39 31 3 34 5 92,5 157 38 65 108,2 / 108,5 3100 1
400-0078 55 71 107,7 58,5 44,5 31 8 33 5 92,5 157 25 28 108,2 / 108,5 3100 2
400-0460/E 55 69 107,7 54 40 31 4 30 5 92,5 157 31 49 * 3100 3
400-0259 55 76 123,5 57 42 33 4,5 33 5 109,7 185,7 25 28 * 3353 2

THE BEARINGS ARE IN ZRS EXECUTION.
C: Dynamic load   -   Co: Static load
Ca: Dynamic axial load   -   Coa: Static axial load

* 400-0457/E, 400-0058/52, 400-0059/E, 400-0060/E ARE SUPPLIED WITH LUBRICATION HOLE.

Technical Characteristics - Combined bearings for “I” standard rails

The combined bearings for I profiles keep the standard features.
They are exclusively used by the manufacturers of fort lift masts.

Combined bearings for “I” profiles have the same technical characteristics as fixed combined bearings and adjustable combined bearings with eccentric pin.