Cardan joint bushings and washers


Steel Industry - Cardan joint bushings and washers

Technical Drawing and Exploded View - Cardan joint bushings and washers


1. Seal “g” type
2. Cylindrical rollers
3. Cylindrical rollers
4. Washer in duretano
5. Bushing


Technical Data - Cardan joint bushings and washers

Cardan joint bushings

C.R. rif / ref d (mm) D (mm) A (mm) B (mm) C (mm) E (mm) Spessori / Washers
900-2061 45,85 84 70 60 74 39,5 80.403
900-2062 51,5 92 80 70 83 45,5 80.414
900-2059* 60,5 105 85 76,5 95 49,5 80.402
900-2063 70 122 100 84,8 110 56 80.406
900-2064 76,3 135 115 96,5 120 62 80.404
900-2065 82,75 147 128 102,5 130 70,8 80.405
900-2055 98,18 174 150 113,5 154 75,5 80.409
900-2066 98,18 174 160 113,5 154 75,5 80.409
900-2056 119,28 192 170 124 170 83,5 80.410
900-2057 133,266 220 200 140 195 94 80.411
900-2060 152,2 243 210 162,5 220 107 80.413
900-2058 160,4 263 220 171 235 109 80.412

* The chamfer is not 15° but 38°

Washers

C.R. rif / ref d (mm) D (mm) T (mm) H (mm)
800-0403 18 44,5 20 2,46 - 2,5 - 2,6 - 2,7 - 2,75 - 2,8 - 2,85
800-0414 18,5 49,5 20 2,96 - 3 - 3,04
800-0402 19,5 59 21 2,96 - 3 - 3,04
800-0406 20 67,5 24 2,9 - 3 - 3,1
800-0404 22 72 24 3,46 - 3,5 - 3,54
800-0405 27 82 30 3,46 - 3,5 - 3,54
800-0409 27 96 30 3,46 - 3,5 - 3,54
800-0410 27 105 30 3,96 - 4 - 4,04
800-0411 27 121 30 4,46 - 4,5 - 4,54
800-0413 27 138 30 4,96 - 5 - 5,04
800-0412 27 145 30 4,96 - 5 - 5,04

Technical Characteristics - Cardan joint bushings and washers

Cardan joint bushings allow the coupling of two rotating shafts in order to transmit a stiff torque.
An adequate radial clearance prevents noise and vibrations during functioning.

C.R. cardan joint bushings are manufactured in UNI 100Cr6/100CrMo7 core hardened steel and reach hardness 60-2 HRC.
A threaded hole for greaser UNI 7663 can be executed on the bottom on request. Washers in Duretano with different dimensions can be supplied along with the bushings.